Big Bronco Fiberglass Body Parts

Rust seems to be a problem with most fullsize Broncos, especially in rust-prone regions of the world. Fiberglass body parts can provide a permanent solution to this chronic problem, as well as add a touch of flair.

Part	Years	Supplier	Comments
Hoods (stock and custom)	78+	U.S. Body Source Autofab K Bar S	Autofab and K Bar S sell hoods with a dropped center section. U.S. Body Source sells cowl induction hoods. All three suppliers have stock hoods.
Tilt Front Ends	78+	U.S. Body Source	These are one piece front ends that include fenders, hood, and grille, or grill mounting locations.
Front Fenders	78+	U.S. Body Source Autofab	Autofab sells a variety of custom fenders with larger wheel openings and/or bulges. Some Autofab fenders require custom mounting hardware. Both suppliers have stock fenders.
Doors	78-79	U.S. Body Source	These are complete fiberglass doors that mount to stock hinges.
Door Skins	80+	Autofab	This is the outer panel only of a door. It would require custom mounting hardware.
Rear Quarter Panels	80+	Autofab	These panels are in the 87+ style, and require custom mounting. They have a 3" larger wheel opening, and a 2.5" bulge. They sell matching front fenders for 92+ Broncos, and have similar fenders for 87-91 models.
Tailgate	80+ ?	K Bar S	This is a complete, fully functional tailgate. At last check, K Bar S was not actively selling it, but would make one on request. They told me demand was low because they cost as much as a new 'gate from Ford plus shipping.
Tailgate Access Panel	78+ ?	K Bar S	This panel replaces the stock steel access panel. It may or may not fit 78-79 models, but should fit 80+. Check with the supplier.

Supplier Info:

Please tell these suppliers that you heard about them on Off-Road.com.

US Body Source

Star Route 1, Box 800

Hampton, FL 32044

Phone 904-468-2203

Fax 904-468-2164

Autofab

10996 Woodside Avenue North

Santee, CA 92071

Phone (619) 562-1740

Fax (619) 562-6151