King Pin Information for 1969 Bronco

Thu, 2008-06-12 00:43 — redfishtony

I am looking for the numbers for the king pin seal and bearings for my 69. I have found the kits but I only need the bearings. Thanks for the information.

EB Tech

Thu, 2008-06-12 03:45 — jpiacenza

King pin bearing

If it is a Dana 30 the replacement bearing and race is available at Bronco Graveyard. I checked a local Timken dealer and Jeffs was less for the bearing and race than they were for the bearing only.
The bearing off my dana 30 king pin is a Bower (but I was told the same number as timken) 11590, race number is 11520.
Hope this helps.

Mon, 2008-06-16 01:46 — redfishtony

Thanks for the numbers and

Thanks for the numbers and the info. I did find them on line but thought I might be able to save some bucks getting them locally. I will go ahead and order them from Jeff's. Thanks, TW

Tony Walters
1969 Sport HD
302, 3 speed
Original Stock Truck