Bronco.com HOME
 

---------

---------

Re: [Bfix] F-250 shock mounts-what year?

From: Brett Kinch <kinchx4_at_earthlink.net>
Date: Fri, 1 Feb 2002 09:22:48 -0700

  So by welding the F-250 shock mount right up against the coil cup, are you
also tilting the F-250 mount outward as it goes up? If so, this is may be
why you are bending your lower shock mount, I believe, because the shock is
at too much of a slant and is pushing semi-laterally when compressing. Just
a theory...
 What did you do about the outer lip of the coil cup near the shock mount.
Did it give you enough room for your shock body?
Brett Kinch
Rock-Quip
www.rock-quip.rockcrawler.com



> I did mine basically the same way, but it appears that the bottom shock
> mount on the stock arm is binding inward? Anyway to fix this? I just
bought
> a set of used all 4 fun lengthened radius arms to install and maybe that
> will help? Man these things are BEEFY!
> Ben
>
>
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> For Broncofix list addition and removal, go to http://www.broncofix.com
> Check out our new message board at http://www.broncofix.com/board!!!
> For additional assistance, email the admin at admin_at_broncofix.com
>
> ------------------------------
> Early Bronco Mailing List (EBML)
> Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
> in the messagebody.
> To modify your account (switch to digest or to real-time), goto:
> http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> Admin address: EBML-owner_at_bronco.com
>
Received on Fri Feb 01 2002 - 09:27:56 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com