Bronco.com HOME
 

---------

---------

Re: Re: No 4WD, guesses on why?

From: MICHAEL MUSSETT <mkmussett_at_hotmail.com>
Date: Wed, 06 Feb 2002 22:47:07

May have striped out a hub possibly.......

Mike


>From: Lee Wilson <lwilson3_at_houston.rr.com>
>To: Cary Reno <creno_at_paragontotalsolutions.com>, "'Shawn Taylor'"
><shawnt_at_nmt.edu>, ebml_at_bronco.com
>CC: mail_at_broncofix.com
>Subject: [EBML] Re: No 4WD, guesses on why?
>Date: Wed, 06 Feb 2002 16:29:33 -0600
>
>
>
>
> > When I did this in mud I busted the teeth of the ring gear in my D30.
>Do
> > you have a 30 or 44? It's pretty easy to figure out, just look in the
> > knuckles to see if it's the u-joints. If not, check (and hope) it's the
> > hubs. If not, take off the diff cover and check the R&P. If it's a D30
> > I'll bet you busted some teeth off the Ring gear.
> >
> > Here's how I fixed mine: Started searching for a used D44 with the same
> > ratio, installed D44. Worked great! ;^)
> >
> > Lee Wilson
> > Houston, TX
> > 1970 Bronco, 351W (soon to be SEFI), C4, 36" Swampers, REP8000, Lock
>Rights
> > F&R
> > 2002 F350 SD Power Stroke 4X4 Lariat auto CC 156", 3.5" Fabtech,
>315/75-16s
> > ----- Original Message -----
> > From: "Cary Reno" <creno_at_paragontotalsolutions.com>
> > To: "'Shawn Taylor'" <shawnt_at_nmt.edu>; <embl_at_bronco.com>
> > Cc: <mail_at_broncofix.com>
> > Sent: Wednesday, February 06, 2002 3:55 PM
> > Subject: RE: [EMBL][Bfix]No 4WD, guesses on why?
> >
> >
> > > Broken axle or ring and pinion. Probably the axle. Was the front
> > > carrier open, limited slip, or lock. If open, breaking one side will
> > > cause that axle to turn not leaving and power going to the unbroken
> > > axle. I think this is right.
> > >
> > > Cary Reno
> > > 77 Bronco, 302, NP435 (soon to be SEFI)
> > > Warn 8274 Winch and Bumper
> > > 35x12.50 Good Year MTR's on AR Baja's 15x10
> > > Big Bearing 9"
> > >
> > > 72 Bronco
> > > 302 Carbed
> > > 3 Speed (soon to be ZF hopefully)
> > > 33x12.50's (soon to be 35's and a 2" body lift)
> > > "Soon to be better..but hey..it's already a Bronco, that's a great
> > > start!"
> > >
> > >
> > > -----Original Message-----
> > > From: mail-owner_at_broncofix.com [mailto:mail-owner_at_broncofix.com] On
> > > Behalf Of Shawn Taylor
> > > Sent: Wednesday, February 06, 2002 4:46 PM
> > > To: embl_at_bronco.com
> > > Cc: mail_at_broncofix.com
> > > Subject: [EMBL][Bfix]No 4WD, guesses on why?
> > >
> > >
> > > Hi all,
> > >
> > > I was out playing on a snowy hill and while trying to rock my way up a
> > > stubborn part heard a bad sound from the front of my Bronco. Now 4WD
> > > works when there's little load on it, but if i punch it, or try to go
> > > uphill, there's a grinding sound and the front end feels like its
>going
> > > over a bump and the front wheels don't do anything usefull (except
>keep
> > > the axle off the ground). Any guesses on what i did? The one clue
> > > (second-hand 'cause i was driving and didn't see it myself) is that my
> > > friends said that one time it was "grinding" the front driveshaft was
> > > turning but the front wheels weren't (yes, the hubs were engaged).
>I'm
> > > thinking that something must have broke in the front diff and is
>letting
> > > something connected to the driveshaft be pushed back instead of
>staying
> > > where it belongs and engaging the gears. I imagine it'll be pretty
> > > obvious once I tear apart the diff, just wanted to solicit some
> > > opinions.
> > >
> > > TIA,
> > > Shawn
> > > -69
> > > -Albuquerque, NM
> > >
> > >
> > >
><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > > For Broncofix list addition and removal, go to
>http://www.broncofix.com
> > > Check out our new message board at http://www.broncofix.com/board!!!
>For
> > > additional assistance, email the admin at admin_at_broncofix.com
> > >
> > >
> > >
> > >
><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > > For Broncofix list addition and removal, go to
>http://www.broncofix.com
> > > Check out our new message board at http://www.broncofix.com/board!!!
> > > For additional assistance, email the admin at admin_at_broncofix.com
> > >
> >
>
>------------------------------
>Early Bronco Mailing List (EBML)
>Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
>in the messagebody.
>To modify your account (switch to digest or to real-time), goto:
>http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
>Admin address: EBML-owner_at_bronco.com


_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
Received on Wed Feb 06 2002 - 15:47:18 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com