Bronco.com HOME
 

---------

---------

Re: [Bfix] Welder recomendations

From: Leland Wilson <lwilson3_at_houston.rr.com>
Date: Wed, 6 Feb 2002 18:28:37 -0600

You'd better check your facts again Brett. The Miller's "Output Range" is
210, not the actual or rated output which is only 160 amps whereas the
Lincoln is 200. Both companies try to mislead you a bit. (Lincoln does the
same on their smaller welders.) They can get away with this as long as they
show the "Rated Output" somewhere. Buyer beware...

Lee Wilson
Houston, TX
----- Original Message -----
From: "Brett Kinch" <kinchx4_at_earthlink.net>
To: "bfix" <mail_at_broncofix.com>; "ebml" <ebml_at_bronco.com>
Sent: Wednesday, February 06, 2002 6:02 PM
Subject: Re: [Bfix] [EBML] Welder recomendations


> The185 has been replaced by the 210 which is more powerful than Lincoln's
> 200.
> Rated Output:
> Miller 210--160 amps at 24.5 volts at 60% duty cycle
> Lincoln 200-- 150 amps at 24 volts at 60% duty cycle
> Interestingly, my Miller 185 has the same rated output as the Lincoln 200
> except for 1 volt....
> Miller 185-- 150 amps at 23 volts at 60% duty cycle
> Hmmmm.............
> Brett Kinch
> Rock-Quip
> www.rock-quip.rockcrawler.com
>
>
>
> > Kevin, good choice!!!!!! Ive used the Miller 185 and it cannot hang with
> my
> > lincoln power mig. Mine cost me 50 bucks more than the 185 and its a
true
> > quality unit. And like Brian said, its got that cool Nascar sticker on
> it!!!
> > :)
> >
> >
> > Clint
> > ----- Original Message -----
> > From: "Kevin Lackey" <lackkevi_at_inconnu.isu.edu>
> > To: "Mike Bowlin" <live2wheel_at_msn.com>
> > Cc: <EBML_at_bronco.com>; <mail_at_broncofix.com>
> > Sent: Wednesday, February 06, 2002 1:19 PM
> > Subject: Re: [Bfix] [EBML] Welder recomendations
> >
> >
> > > I think after looking around I am going to get a Licoln PowerMig 200.
I
> > > found them for $1057.32 at www.weldingmart.com with free delivery. I
> just
> > > have to decide between at 200 amp and the 255 amp unit........ a
little
> > > more money.
> > > Kevin
> > >
> > > --
> > > Pereant, inquit, qui ante nos nostra dixerunt.
> > >
> > >
> > >
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > > For Broncofix list addition and removal, go to
http://www.broncofix.com
> > > Check out our new message board at http://www.broncofix.com/board!!!
> > > For additional assistance, email the admin at admin_at_broncofix.com
> > >
> >
> >
> >
> > ######################################################################
> > Attention:
> > This e-mail message is privileged and confidential. If you are not the
> > intended recipient please delete the message and notify the sender.
> > Any views or opinions presented are solely those of the author.
> > ######################################################################
> >
> >
>
############################################################################
> #########
> > This e-mail message has been scanned for Viruses and Content.
> >
>
############################################################################
> #########
> >
> > <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > For Broncofix list addition and removal, go to http://www.broncofix.com
> > Check out our new message board at http://www.broncofix.com/board!!!
> > For additional assistance, email the admin at admin_at_broncofix.com
> >
>
> ------------------------------
> Early Bronco Mailing List (EBML)
> Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
> in the messagebody.
> To modify your account (switch to digest or to real-time), goto:
> http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> Admin address: EBML-owner_at_bronco.com
>
Received on Wed Feb 06 2002 - 17:38:57 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com