Bronco.com HOME
 

---------

---------

Re: [Bfix] Welder recomendations

From: Lee Novikoff <Lee_at_tidalgroup.com>
Date: Thu, 7 Feb 2002 08:43:14 -0600

We are talking about advertising number more than anything else. I have
welded with both the 185 and 210 and can not tell a shred of difference
between the two in power. I am betting Lincoln made a 200 simply to have a
slight advertising advantage over the 185. Probably the same reason Miller
upped the 185 to a 210. Any of the 3 is plenty of machine for all jobs up
to 1/2 plate. I can not imagine myself needing to weld anything thicker
than that.
-Lee Novikoff
San Antonio Texas
----- Original Message -----
From: "Brett Kinch" <kinchx4_at_earthlink.net>
To: "bfix" <mail_at_broncofix.com>; "ebml" <ebml_at_bronco.com>
Sent: Wednesday, February 06, 2002 6:02 PM
Subject: Re: [Bfix] [EBML] Welder recomendations


> The185 has been replaced by the 210 which is more powerful than Lincoln's
> 200.
> Rated Output:
> Miller 210--160 amps at 24.5 volts at 60% duty cycle
> Lincoln 200-- 150 amps at 24 volts at 60% duty cycle
> Interestingly, my Miller 185 has the same rated output as the Lincoln 200
> except for 1 volt....
> Miller 185-- 150 amps at 23 volts at 60% duty cycle
> Hmmmm.............
> Brett Kinch
> Rock-Quip
> www.rock-quip.rockcrawler.com
>
>
>
> > Kevin, good choice!!!!!! Ive used the Miller 185 and it cannot hang with
> my
> > lincoln power mig. Mine cost me 50 bucks more than the 185 and its a
true
> > quality unit. And like Brian said, its got that cool Nascar sticker on
> it!!!
> > :)
> >
> >
> > Clint
> > ----- Original Message -----
> > From: "Kevin Lackey" <lackkevi_at_inconnu.isu.edu>
> > To: "Mike Bowlin" <live2wheel_at_msn.com>
> > Cc: <EBML_at_bronco.com>; <mail_at_broncofix.com>
> > Sent: Wednesday, February 06, 2002 1:19 PM
> > Subject: Re: [Bfix] [EBML] Welder recomendations
> >
> >
> > > I think after looking around I am going to get a Licoln PowerMig 200.
I
> > > found them for $1057.32 at www.weldingmart.com with free delivery. I
> just
> > > have to decide between at 200 amp and the 255 amp unit........ a
little
> > > more money.
> > > Kevin
> > >
> > > --
> > > Pereant, inquit, qui ante nos nostra dixerunt.
> > >
> > >
> > >
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > > For Broncofix list addition and removal, go to
http://www.broncofix.com
> > > Check out our new message board at http://www.broncofix.com/board!!!
> > > For additional assistance, email the admin at admin_at_broncofix.com
> > >
> >
> >
> >
> > ######################################################################
> > Attention:
> > This e-mail message is privileged and confidential. If you are not the
> > intended recipient please delete the message and notify the sender.
> > Any views or opinions presented are solely those of the author.
> > ######################################################################
> >
> >
>
############################################################################
> #########
> > This e-mail message has been scanned for Viruses and Content.
> >
>
############################################################################
> #########
> >
> > <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > For Broncofix list addition and removal, go to http://www.broncofix.com
> > Check out our new message board at http://www.broncofix.com/board!!!
> > For additional assistance, email the admin at admin_at_broncofix.com
> >
>
>
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> For Broncofix list addition and removal, go to http://www.broncofix.com
> Check out our new message board at http://www.broncofix.com/board!!!
> For additional assistance, email the admin at admin_at_broncofix.com
Received on Thu Feb 07 2002 - 07:50:00 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com