RE: 9" pinion Shaft seal

From: David Routhier <>
Date: Thu, 7 Feb 2002 14:37:11 -0800

You need to replace the crush sleeve and torque it to spec. I would not
follow any advice that says you can bypass this step, UNLESS the advice is
to have a rear end shop replace the crush sleeve with a machined spacer.

Just my opinion.


-----Original Message-----
From: []On Behalf Of
Tom Green
Sent: Thursday, February 07, 2002 1:29 PM
To:; broncofix; ebml
Subject: [EBML] 9" pinion Shaft seal

 The seal on my 9" leaks around the pinion. Is this something I can
replace, or does it need to go to a shop for appropiate torqueing and
what ever.

Do You Yahoo!?
Send FREE Valentine eCards with Yahoo! Greetings!
Early Bronco Mailing List (EBML)
Unsubscribe: unsubscribe EBML
in the messagebody.
To modify your account (switch to digest or to real-time), goto:
Admin address:
Received on Thu Feb 07 2002 - 15:39:52 MST

Email us at:
Many thanks to our contributors.
© 1996 - 2016