Bronco.com HOME
 

---------

---------

Re: [Bfix] underdrive pulleys

From: Dave <67bronco_at_lsol.net>
Date: Thu, 7 Feb 2002 17:42:51 -0600

I haven't noticed any problems at all ps works great. The temp on trails
came up a little but I have no inner fenderwells so that's ok.
Dave K
Two Rivers WI
----- Original Message -----
From: "Lee Novikoff" <Lee_at_tidalgroup.com>
To: "Bob & Janet Wood" <johngalt_at_zenitharchery.com>; "EBE"
<mail_at_broncofix.com>; "Early Bronco Mailing List" <ebml_at_bronco.com>
Sent: Thursday, February 07, 2002 7:26 AM
Subject: Re: [Bfix] [EBML] underdrive pulleys


> I would strongly recommend against it. I ran one for a while and noticed
> all kinds of problems. The PS pump was too weak, same as the alternator.
I
> did not notice any cooling problems, but I had an oversized aluminum
> radiator.
> -Lee Novikoff
> San Antonio Texas
> ----- Original Message -----
> From: "Bob & Janet Wood" <johngalt_at_zenitharchery.com>
> To: "EBE" <mail_at_broncofix.com>; "Early Bronco Mailing List"
> <ebml_at_bronco.com>
> Sent: Wednesday, February 06, 2002 2:38 PM
> Subject: [EBML] underdrive pulleys
>
>
> > Can someone give me a run down of the basics on an underdrive pulley
> > system on a 351W? Benefits, drawbacks, warnings. Are the 302 versions
> > the same as for a 351W? Any info would be appreciated.
> >
> > TIA
> >
> > Bob
> > ------------------------------
> > Early Bronco Mailing List (EBML)
> > Unsubscribe: majordomo_at_bronco.com unsubscribe EBML
youremailid_at_yourisp.com
> > in the messagebody.
> > To modify your account (switch to digest or to real-time), goto:
> > http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> > Admin address: EBML-owner_at_bronco.com
>
>
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> For Broncofix list addition and removal, go to http://www.broncofix.com
> Check out our new message board at http://www.broncofix.com/board!!!
> For additional assistance, email the admin at admin_at_broncofix.com
Received on Thu Feb 07 2002 - 16:41:46 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com