Bronco.com HOME
 

---------

---------

Re: dana 6 questions

From: John Foottit <foottdc9_at_erau.edu>
Date: Thu, 7 Feb 2002 20:22:58 -0700

83 will have either a dana 60(f250) dana 70 (some 350's, or a 10.25 ford
(250 or 350) the front on an 83 will be a Twin Traction Beam IFS dana 44
with leaf springs in the 250's and 350's, with a possible optional TTB dana
50.
----- Original Message -----
From: "Laddle Cottongim" <oneofus_at_sekybiz.com>
To: <ebml_at_bronco.com>
Sent: Thursday, February 07, 2002 6:47 PM
Subject: [EBML] dana 6 questions


> Found a 1983 F250 4x4 today with huge rearends. I am assuming they are
dana
> 60s. The hubs were MUCH larger than the ones on my dana 44. (Did Ford use
> anything else that year?) Now if they are dana 60s what are the pros and
> cons of this particular years front rear?I know some years are better that
> others. what would be a good (read cheap) offer for these? Also the truck
> seemed to have some sort of factory hydrolic (sp) steering. I remeber some
> posts about that not long ago but just skimmed over them. Would this be
> worth getting as well? I'm sure it would be cheaper than ram assist.
What's
> a good price on these? TIA
>
> Laddle
> London, Ky
> If GOD is your co-pilot,
> swap seats.
>
>
> ------------------------------
> Early Bronco Mailing List (EBML)
> Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
> in the messagebody.
> To modify your account (switch to digest or to real-time), goto:
> http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> Admin address: EBML-owner_at_bronco.com
>
Received on Thu Feb 07 2002 - 20:23:16 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com