Bronco.com HOME
 

---------

---------

Re: [Bfix] Coil spring measurement

From: Erik Christensen <cat44_at_shaw.ca>
Date: Thu, 07 Feb 2002 20:18:38 -0800

stock usually has about 1.5"+ between the frame and the tops of the bump
stops in front. 3/4" to 2.5" is seen here and there, but of all the ones
I've seen, the average seems to be about 1.5"-2". that should make the
coil in the 12" range?

YZ250MXer_at_aol.com wrote:
>
> Can anyone give me the measurement of a stock EB coil from perch to the
> bottom mounting plate? I'm trying to determine how much lift the previous
> owner put on her. TIA, Tom
>
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> For Broncofix list addition and removal, go to http://www.broncofix.com
> Check out our new message board at http://www.broncofix.com/board!!!
> For additional assistance, email the admin at admin_at_broncofix.com

-- 
Captain Air Time
-I'm on my way to impact
Taste the high speed dirt!
http://members.shaw.ca/cat44
http://members.shaw.ca/cat44/ranger.htm
Received on Thu Feb 07 2002 - 21:06:07 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com