Bronco.com HOME
 

---------

---------

Re: [Bfix] underdrive pulleys

From: Dave <67bronco_at_lsol.net>
Date: Fri, 8 Feb 2002 16:13:20 -0600

Good Point
Its usually 60 or 70 degree's or colder with a large fan on my 351
Dave K
----- Original Message -----
From: "Lee Novikoff" <Lee_at_tidalgroup.com>
To: "Dave" <67bronco_at_lsol.net>; "Bob & Janet Wood"
<johngalt_at_zenitharchery.com>; "EBE" <mail_at_broncofix.com>; "Early Bronco
Mailing List" <ebml_at_bronco.com>
Sent: Friday, February 08, 2002 8:24 AM
Subject: Re: [Bfix] [EBML] underdrive pulleys


> Come down to Texas in August and do some crawlin in the creekbeds. That
105
> degree heat really gets your EB cookin!
>
> I could not even notice a HP gain with the pulleys.
> -Lee Novikoff
> San Antonio Texas
> ----- Original Message -----
> From: "Dave" <67bronco_at_lsol.net>
> To: "Lee Novikoff" <Lee_at_tidalgroup.com>; "Bob & Janet Wood"
> <johngalt_at_zenitharchery.com>; "EBE" <mail_at_broncofix.com>; "Early Bronco
> Mailing List" <ebml_at_bronco.com>
> Sent: Thursday, February 07, 2002 5:42 PM
> Subject: Re: [Bfix] [EBML] underdrive pulleys
>
>
> > I haven't noticed any problems at all ps works great. The temp on trails
> > came up a little but I have no inner fenderwells so that's ok.
> > Dave K
> > Two Rivers WI
> > ----- Original Message -----
> > From: "Lee Novikoff" <Lee_at_tidalgroup.com>
> > To: "Bob & Janet Wood" <johngalt_at_zenitharchery.com>; "EBE"
> > <mail_at_broncofix.com>; "Early Bronco Mailing List" <ebml_at_bronco.com>
> > Sent: Thursday, February 07, 2002 7:26 AM
> > Subject: Re: [Bfix] [EBML] underdrive pulleys
> >
> >
> > > I would strongly recommend against it. I ran one for a while and
> noticed
> > > all kinds of problems. The PS pump was too weak, same as the
> alternator.
> > I
> > > did not notice any cooling problems, but I had an oversized aluminum
> > > radiator.
> > > -Lee Novikoff
> > > San Antonio Texas
> > > ----- Original Message -----
> > > From: "Bob & Janet Wood" <johngalt_at_zenitharchery.com>
> > > To: "EBE" <mail_at_broncofix.com>; "Early Bronco Mailing List"
> > > <ebml_at_bronco.com>
> > > Sent: Wednesday, February 06, 2002 2:38 PM
> > > Subject: [EBML] underdrive pulleys
> > >
> > >
> > > > Can someone give me a run down of the basics on an underdrive pulley
> > > > system on a 351W? Benefits, drawbacks, warnings. Are the 302
versions
> > > > the same as for a 351W? Any info would be appreciated.
> > > >
> > > > TIA
> > > >
> > > > Bob
> > > > ------------------------------
> > > > Early Bronco Mailing List (EBML)
> > > > Unsubscribe: majordomo_at_bronco.com unsubscribe EBML
> > youremailid_at_yourisp.com
> > > > in the messagebody.
> > > > To modify your account (switch to digest or to real-time), goto:
> > > > http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> > > > Admin address: EBML-owner_at_bronco.com
> > >
> > >
> > >
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> > > For Broncofix list addition and removal, go to
http://www.broncofix.com
> > > Check out our new message board at http://www.broncofix.com/board!!!
> > > For additional assistance, email the admin at admin_at_broncofix.com
> >
> > ------------------------------
> > Early Bronco Mailing List (EBML)
> > Unsubscribe: majordomo_at_bronco.com unsubscribe EBML
youremailid_at_yourisp.com
> > in the messagebody.
> > To modify your account (switch to digest or to real-time), goto:
> > http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
> > Admin address: EBML-owner_at_bronco.com
>
>
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> For Broncofix list addition and removal, go to http://www.broncofix.com
> Check out our new message board at http://www.broncofix.com/board!!!
> For additional assistance, email the admin at admin_at_broncofix.com
Received on Fri Feb 08 2002 - 15:13:17 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com