Re: metal brake

From: Jeff Martin <>
Date: Sat, 9 Feb 2002 14:31:11 -0600

I made something like this out of 2 pieces of angle iron and a bench vice.
Removed the brass faces off the vice and drilled two holes to match in the
angle iron to bolt them on the vice. Works great for small stuff.
Jeff Martin
'73 Sport, 94 5.0 HO, NP435
Barry, Illinois

----- Original Message -----
From: "Mike Bowlin" <>
To: "Broncofix" <>; "Strungout EB Freaks"
Sent: Saturday, February 09, 2002 11:00 AM
Subject: [EBML] metal brake

> The other day I was at a local shop and spotted on one of their benches a
small metal brake, not
> like a sheet metal brake but it was just a V that pressed into another V
looked like it would do 1/8
> fairly easily and was about 10"s long. I thought to myself, self that
would be a pretty handy little
> thing to bend your own brackets and what not with. Anyone know where to
get such apparatus?
> Mike Bowlin
> 67 EB narrowed 8"s...sefi 5.0,700r4,4.3 atlasII
> ------------------------------
> Early Bronco Mailing List (EBML)
> Unsubscribe: unsubscribe EBML
> in the messagebody.
> To modify your account (switch to digest or to real-time), goto:
> Admin address:
Received on Sat Feb 09 2002 - 13:35:38 MST

Email us at:
Many thanks to our contributors.
© 1996 - 2016