Re: Tire rack hinge?

From: John Foottit <>
Date: Sun, 10 Feb 2002 15:59:48 -0700

use a trailer stub axle, and either use a modified trailer wheel hub, or
machine a piece of heavy tubing to accept the bearing races...
----- Original Message -----
From: "Ben Toms" <>
To: <>; <>
Sent: Saturday, February 09, 2002 8:39 PM
Subject: [EBML] Tire rack hinge?

> My buddy at work built me a nice rear bumper with a tire rack last year.
> were in kind of a hurry and ended up using a cut off hitch pin and a
> of bushings with set screws for the tire rack hinge. This still works but
> has gotten pretty loose and shaky. Any ideas on what to use to replace
> the right way? Looking for something with bearings to weld up to the swing
> away rack to mount to the bumper. What do I need and where might I find
> Any suggestions would be appreciated.
> Ben Toms
> ------------------------------
> Early Bronco Mailing List (EBML)
> Unsubscribe: unsubscribe EBML
> in the messagebody.
> To modify your account (switch to digest or to real-time), goto:
> Admin address:
Received on Sun Feb 10 2002 - 16:00:29 MST

Email us at:
Many thanks to our contributors.
© 1996 - 2016