Bronco.com HOME
 

---------

---------

RE: RE: [EBeast] Serpentine conversion info

From: Benjamin J. Franklin <bjf68_at_earthlink.net>
Date: Tue, 12 Feb 2002 21:28:10 -0500

FYI, the march pulley I have is 2" thick and 5.75 wide and is a two groove
pulley.
Ben

-----Original Message-----
From: EBML-owner_at_bronco.com [mailto:EBML-owner_at_bronco.com]On Behalf Of
Lars Pedersen
Sent: Tuesday, February 12, 2002 1:31 PM
To: ebml_at_bronco.com
Subject: Re: [EBML] RE: [EBeast] Serpentine conversion info


Allen-

One option might be to get a 50 oz imbalance damper with matching
serpentine pulley- say, from a mustang 5.0, then have the damper rebalanced
to 28 oz by a competent machine shop. If you can't find a donor it might be
the path of least resistance...

If you do find a donor, perhaps you could post your findings. This seems to
come up once in a while.

Lars Pedersen
Davis, CA

At 09:33 02/12/2002 -0500, you wrote:


>The search for info doesn't seem to be going well, so I'll ask a
>specific question and see what I can piece together then post the
>results. As I said before, I've got a 78 block, which has a 4 bolt 28 oz
>imbalance dampner on it. So my question is, what years still had the
>28oz imbalance, but had a serpentine crank pulley? I'm either looking to
>pull the dampner + pulley or find a crank pulley that'll fit my dampner.
>
>------------------------------
>Early Bronco Mailing List (EBML)
>Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
>in the messagebody.
>To modify your account (switch to digest or to real-time), goto:
>http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
>Admin address: EBML-owner_at_bronco.com

------------------------------
Early Bronco Mailing List (EBML)
Unsubscribe: majordomo_at_bronco.com unsubscribe EBML youremailid_at_yourisp.com
in the messagebody.
To modify your account (switch to digest or to real-time), goto:
http://mail.bronco.com/cgi-bin/mj_wwwusr/domain=bronco.com/EBML.
Admin address: EBML-owner_at_bronco.com
Received on Tue Feb 12 2002 - 19:26:18 MST


Email us at: info@bronco.com
Many thanks to our contributors.
© 1996 - 2016 www.Bronco.com